The best multi-faceted joinery system on the market! Produce “no-slop” through, half blind and sliding dovetails with a classic handcut look. Comes with everything needed to get under way: 1/2″ x 8 degree and 1/2″ x 14 degree dovetail cutters and a 5/16″ x 1″ straight cutter (all 8mm shanks), a 1/2″ to 8mm collet reducer, a 7/16″ O.D. guide bushing, a 160-page manual, and a 44-minute DVD. Router with a 1/2″ collet required. Handles boards up to 24″ wide and 1-1/4′ thick – all with infinite adjustment of pin, tail width and spacing. Adjustable guidefingers mean you are never compelled to dimension your work to suit the jig. Plan your project just as if you were going to cut the joints by hand, then set up the jig to fit the work. You are never limited to repetitive, clearly machine-made joints. Also includes cam-action speed clamps, crosscut bar, angled side stop, screwdriver, all mounting hardware.Constructed from extruded aluminum, the redesigned jig body now has fixe (more…)