Stanley 19-800 Saw Storage Mitre Box with 12-Inch Backsaw

Amazon.com

The Stanley Saw Storage Mitre Box with 12-Inch Backsaw not only comes with a 12-inch backsaw, but is also designed to hold all 12-by-14-inch Stanley backsaws, and features a simple one-finger release button that easily releases the saw from the storage cavity. Additionally, the box features 90-degree, 45-degree, and 22-1/2-degree mitre slots, as well as holes in base for fastening the box to a workbench. The box also features lightweight, high-impact ABS plastic construction for easy portability and long-lasting durability, an open interior design that allows cuttings to fall through for easy clean-up, an integrated pencil pocket, and a front lip that butts up against the work table to reduce slippage. The box’s unique design can be used with both back saws and panel saws, and comes with a manufacturer’s limited lifetime warranty. To choose the saw that’s best for you, view the comparison chart of Stanley saw blades.

Lightweight, high (more…)

Nice Gerdening Decor

Stanley 20-800 Contractor Grade Clamping Mitre Box

Amazon.com

Ergonomically designed with a slip-resistant grip for maximum comfort and control, the Stanley Contractor Grade Clamping MiterBox features a simple angle adjustment and a quick, simple cam clamp to hold work for accurate and precise cuts. The included saw sports induction-hardened teeth that stay sharp 3-5 times longer than standard saw blades, and its precision design enables smooth, accurate cuts in wood as well as metal. This saw is backed by a limited lifetime warranty. To choose the saw that’s best for you, view the comparison chart of Stanley saw blades.

(more…)

SLIDING COMPOUND MITRE / MITER SAW 10″ w LASER LINE NEW

BRAND NEW – 10″ SLIDING COMPOUND MITER SAW! Features LASER GUIDE for precise cuts. Getting to know this Miter Saw: – Laser Switch – Turns on or off the laser guide light. – Power Switch – inside the handle, just pull the trigger and the saw fires up. – Switch Handle – This handle contains the power switch. The blade is lowered into the workpiece by pushing / pulling down on the handle. – Arbor Lock – Allows the user to keep the blade from rotating while tightening or loosening arbor screw during blade replacement or removal. – Lower Blade Guard / Lower Guard Lip – The lower blade guard helps protect your hands from the spinning blade. It retracts as the blade is lowered. Lip can be used to raise and lower guard if guard becomes jammed on the workpiece. – Blade – Use only 10″ inch (254mm) blades. – Fence – Supports the workpiece. The fence has a cast in scale to make repetitive cuts easy. The fence also has holes which are used to secure an auxilary fence if (more…)

Hitachi 998862 8-1/2-Inch 60-Tooth ATB Carbide Saw Blade with 5/8-Inch Arbor

From the Manufacturer

Hitachi’s premium 8-1/2-Inch miter saw blade offers the best cutting performance available. The carbide teeth are brazed with three metals allowing the tips to withstand extreme impact for maximum durability. The precision ground thin kerf allows for tight, clean, precise and fast cuts. The steel blade is laser cut keeping it flat and true for lasting performance making this 60-tooth saw blade ideal for producing ultra fine and smooth finishes in decorative moldings, veneer, laminates, soft and hard woods.

Hitachi 998862 8-1/2″ x 60 Tooth Carbide Tipped Cross-Cut Circular Saw Blade 5/8″ Arbor. Ultra fine smooth finish in decorative moldings, veneer laminates, soft and hardwood cabinetry.

(more…)

Makita LS1016LX 10-Inch Dual Slide Compound Miter Saw with Laser and Stand

From the Manufacturer

Makita changes the game with the LS1016L 10-Inch Dual Slide Miter Saw featuring a crown molding cutting capacity of 6-5/8 inches (vertically nested)—the largest in its class. It has a patented Four-Steel Rail Sliding System that further increases rigidity to produce superior cuts, and the exclusive six linear ball bearings design for smooth, adjustment-free, “dead-on” accurate cuts.

Largest crown molding cutting capacity in its class. Compact design with a patented 4-Steel Rail Sliding System further increases rigidity to produce superior cuts. Exclusive 6 linear ball bearings deliver smooth solid and adjustment-free dead-on accurate cuts. Increased capacity for up to 6-5/8 crown molding (vertically nested) 4-3/4 baseboard (vertical) and 12 cross cuts at 90º.

(more…)

Hitachi C8FSE 8-1/2-Inch Sliding Compound Miter Saw

Amazon.com

The Hitachi C8FSE 8-1/2-Inch Sliding Compound Miter Saw provides smooth, accurate miters and crosscuts in a variety of workpieces, including trim and crown molding. Its gliding slide system allows for easy handling of large framing pieces, and its compound cutting capability provides versatility on the job. An ideal tool for trim carpenters, framers, and woodworkers who demand precision and reliability, the C8FSE is the lightest and most portable sliding compound miter saw in its class.C8FSE Compound Miter SawTool SpecificationsAmps9.2No-Load Speed5,500 RPMBlade Diameter8-1/2″Arbor Size5/8″Bevel Angle RangeRight 0°-5°Left 0°-48°Miter Angle RangeRight 0°-57°Left 0°-45°Miter Detent Stops(R & L)15°, 22.5°,31.6°, 45°Cross Cut Capacity (90°)2-9/16″ x 12″Tool Dimensions (WxDxH)21-27/32″ x 31-3/32″ x 19-3/32″Weight31 lbsLinear ball-bearing slide system allows for easy handling of large framing pieces.View larger.Thumb-actuated miter stops facilitate si (more…)

Milwaukee 6950-20 12-inch Dual Bevel Miter Saw with Digital Miter Angle Fine Adjust

From the Manufacturer

The Milwaukee 6950-20 12-Inch dual bevel miter saw features a miter angle fine adjust with detent override which makes it simple to dial-in precise miter angles. This allows the user to quickly adjust for a non-square environment. The fine adjust allows for single hand operation; (1) hand on material, (1) hand making fine adjustment. The miter angle fine adjust features a self zeroing system and it works on the ENTIRE miter angle range. Also features dual integral jobsite lights that fully illuminate the work-piece and cut line from either side of the blade. This makes it easier for the user to see the blade enter the material. It also eliminates the hassle of buying and setting up independent lighting. These lights are especially beneficial on pre-finished millwork. The Milwaukee 6950-20 12-Inch dual bevel miter saw also features an electronic soft start that allows the carpenter to sneak up on the cut line without damaging material. The blade tak (more…)

Hitachi 726101 12-Inch 90-tooth ATB Crosscutting Saw Blade with 1-Inch Arbor

From the Manufacturer

Hitachi’s premium 12-inch miter saw blade offers the best cutting performance available. The carbide teeth are brazed with three metals allowing the tips to withstand extreme impact for maximum durability. The precision ground thin kerf allows for tight, clean, precise and fast cuts. The steel blade is laser cut keeping it flat and true for lasting performance making this 90-tooth saw blade ideal for producing ultra fine and smooth finishes in decorative moldings, veneer, laminates, soft and hard woods.

(more…)

Stanley 20-600 Clamping Mitre Box with Saw

From the Manufacturer

This Stanley 20-600 Clamping Mitre Box has a 14-inch back saw and a built-in measuring scale. Honeycomb base and cam pins secure work for accurate cuts. Cuts miters on 45-degree and 90-degree, face angle 45-degree, and all new 22-1/2-degree angles (for octagonal shapes) popularly used on architectural details such as bay windows. Molded-in storage compartments to hold cam pins and pencil. Base and pins are molded of high impact resistant material for long life. Comes with miter box and two cam pins. Molded lip on base edge for easy use without mounting. Two screw holes on each side to secure base to work top. Built in saw stop to prevent cutting into miter box. Patented design.

(more…)