Woodworking Biscuit Cutters
This gauge shows the exact width and depth of sizes 0, 10 and 20 biscuits slots, allowing you to determine which biscuit size will fit before cutting (and potentially blowing out an edge). Once correctly positioned, the pencil slots allow you to perfectly center your marks. Gauge shows actual cut, which accomodate the swelling of the biscuit once glue is applied. Hole allows it to be hung on the wall.
Versatile, carbide tipped three-wing Stackable Slot Cutter Set cuts a wide variety of grooves. Simply adjust the arrangement of the cutters and shims on the 1/2″ arbor to create a wide variety of groove sizes for dadoes, tongue and groove joints, rabbets, or biscuit joints. With the included 6 carbide-tipped slot cutters (1/16″, 3/32″, 1/8″, 5/32″, 3/16″, & 1/4″), shims, and bearing (7/8″ OD x 5/16″ ID) for 1/2″ cut depth, almost any groove from 1/16″ to 11/16″ can be created. Individual cutters can also create precisely-sized grooves and you can purchase additional bearings to adjust the depth of cut. Storage box included.
The router bits in this money-saving set features K10 and K20 grade carbide for clean cutting action and final sharpened with 400 grit diamond wheels for longer cutting life. All with 1/4″ shanks.Biscuit Cutter Set includes cutter and all three bearings to cut biscuit slots for 0, 10 and 20 size biscuits. All have baked-on Teflon coating to reduce pitch and resin buildup.Rockler router bits are unconditionally guaranteed – if you are not 100 percent satisfied with these bits, send them back for a full refund.
