Leigh Super 12” Dovetail Jig

Extraordinary joint making capability at an exceptional price point! Cut variably spaced Through & Half-blind dovetails easily and accurately. Infinitely adjustable one-piece fingers are easily positioned for any joint pattern, and you are always guaranteed a half pin at each edge of the joint. Rout half-blind pin boards and tail boards at the same time. The finger assembly can also produce two sizes of box joints, 5/16″ and 5/8″. Adjustments for fit can be made in increments of .002″. You can even install the included crosscut fence and the dovetail finger assembly becomes a sliding dovetail template. The amazing joint making capability of Super Jigs is due in part to the revolutionary new Leigh E Bush (patent pending). A simple twist of the E Bush changes it’s active diameter which in turn changes the fit of finger joints and half-blind dovetails. Standard Equipment: 1/2″ 8 dovetail bit 1/2″ 14 dovetail bit 5/16″ straight bit 1/2″ to 8mm collet reducer Sliding dove (more…)

Leigh D4R Dovetail Jig

The best multi-faceted joinery system on the market! Produce “no-slop” through, half blind and sliding dovetails with a classic handcut look. Comes with everything needed to get under way: 1/2″ x 8 degree and 1/2″ x 14 degree dovetail cutters and a 5/16″ x 1″ straight cutter (all 8mm shanks), a 1/2″ to 8mm collet reducer, a 7/16″ O.D. guide bushing, a 160-page manual, and a 44-minute DVD. Router with a 1/2″ collet required. Handles boards up to 24″ wide and 1-1/4′ thick – all with infinite adjustment of pin, tail width and spacing. Adjustable guidefingers mean you are never compelled to dimension your work to suit the jig. Plan your project just as if you were going to cut the joints by hand, then set up the jig to fit the work. You are never limited to repetitive, clearly machine-made joints. Also includes cam-action speed clamps, crosscut bar, angled side stop, screwdriver, all mounting hardware.Constructed from extruded aluminum, the redesigned jig body now has fixe (more…)