Makita LS1016LX 10-Inch Dual Slide Compound Miter Saw with Laser and Stand

From the Manufacturer

Makita changes the game with the LS1016L 10-Inch Dual Slide Miter Saw featuring a crown molding cutting capacity of 6-5/8 inches (vertically nested)—the largest in its class. It has a patented Four-Steel Rail Sliding System that further increases rigidity to produce superior cuts, and the exclusive six linear ball bearings design for smooth, adjustment-free, “dead-on” accurate cuts.

Largest crown molding cutting capacity in its class. Compact design with a patented 4-Steel Rail Sliding System further increases rigidity to produce superior cuts. Exclusive 6 linear ball bearings deliver smooth solid and adjustment-free dead-on accurate cuts. Increased capacity for up to 6-5/8 crown molding (vertically nested) 4-3/4 baseboard (vertical) and 12 cross cuts at 90º.

(more…)

Hitachi C8FSE 8-1/2-Inch Sliding Compound Miter Saw

Amazon.com

The Hitachi C8FSE 8-1/2-Inch Sliding Compound Miter Saw provides smooth, accurate miters and crosscuts in a variety of workpieces, including trim and crown molding. Its gliding slide system allows for easy handling of large framing pieces, and its compound cutting capability provides versatility on the job. An ideal tool for trim carpenters, framers, and woodworkers who demand precision and reliability, the C8FSE is the lightest and most portable sliding compound miter saw in its class.C8FSE Compound Miter SawTool SpecificationsAmps9.2No-Load Speed5,500 RPMBlade Diameter8-1/2″Arbor Size5/8″Bevel Angle RangeRight 0°-5°Left 0°-48°Miter Angle RangeRight 0°-57°Left 0°-45°Miter Detent Stops(R & L)15°, 22.5°,31.6°, 45°Cross Cut Capacity (90°)2-9/16″ x 12″Tool Dimensions (WxDxH)21-27/32″ x 31-3/32″ x 19-3/32″Weight31 lbsLinear ball-bearing slide system allows for easy handling of large framing pieces.View larger.Thumb-actuated miter stops facilitate si (more…)

Milwaukee 6950-20 12-inch Dual Bevel Miter Saw with Digital Miter Angle Fine Adjust

From the Manufacturer

The Milwaukee 6950-20 12-Inch dual bevel miter saw features a miter angle fine adjust with detent override which makes it simple to dial-in precise miter angles. This allows the user to quickly adjust for a non-square environment. The fine adjust allows for single hand operation; (1) hand on material, (1) hand making fine adjustment. The miter angle fine adjust features a self zeroing system and it works on the ENTIRE miter angle range. Also features dual integral jobsite lights that fully illuminate the work-piece and cut line from either side of the blade. This makes it easier for the user to see the blade enter the material. It also eliminates the hassle of buying and setting up independent lighting. These lights are especially beneficial on pre-finished millwork. The Milwaukee 6950-20 12-Inch dual bevel miter saw also features an electronic soft start that allows the carpenter to sneak up on the cut line without damaging material. The blade tak (more…)

Hitachi 726101 12-Inch 90-tooth ATB Crosscutting Saw Blade with 1-Inch Arbor

From the Manufacturer

Hitachi’s premium 12-inch miter saw blade offers the best cutting performance available. The carbide teeth are brazed with three metals allowing the tips to withstand extreme impact for maximum durability. The precision ground thin kerf allows for tight, clean, precise and fast cuts. The steel blade is laser cut keeping it flat and true for lasting performance making this 90-tooth saw blade ideal for producing ultra fine and smooth finishes in decorative moldings, veneer, laminates, soft and hard woods.

(more…)

Stanley 20-600 Clamping Mitre Box with Saw

From the Manufacturer

This Stanley 20-600 Clamping Mitre Box has a 14-inch back saw and a built-in measuring scale. Honeycomb base and cam pins secure work for accurate cuts. Cuts miters on 45-degree and 90-degree, face angle 45-degree, and all new 22-1/2-degree angles (for octagonal shapes) popularly used on architectural details such as bay windows. Molded-in storage compartments to hold cam pins and pencil. Base and pins are molded of high impact resistant material for long life. Comes with miter box and two cam pins. Molded lip on base edge for easy use without mounting. Two screw holes on each side to secure base to work top. Built in saw stop to prevent cutting into miter box. Patented design.

(more…)

Milwaukee 49-22-4155 Master Plumbers Ice Hardened Hole Saw Kit,  18-Piece

From the Manufacturer

Milwaukee Electric Tool Corporation introduces Ice Hardened hole saws, a new generation of hole saws that offer up to 50% longer life than the competition and are ideal for metal and wood cutting in a wide variety of HVAC, electrical, plumbing and maintenance/repair applications. Milwaukee Ice Hardened products utilize a proprietary cryogenic hardening process that improves upon traditional heat treat processes. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout, resulting in life up to 50% longer than the competition. Milwaukee Ice Hardened hole saws also feature Matrix II bi-metal construction for greater durability and a unique precision-ground tooth geometry for faster cutting. A positive rake angle cuts more aggressively while deeper gullets quickly remove chips. A radiused back (more…)

Milwaukee 49-22-4075 7-Piece Carbide Tipped Job Saver Hole Saw Kit

Amazon.com

The Milwaukee Carbide-Tipped “Job Saver” Hole Saw Kit provides the tools necessary for most everyday hole drilling needs; carbide-tipped hole saws are especially useful for drilling holes in ceramic tile, fiberglass, fiberboard, and flake board, but are not recommended for drilling in metal. This 7-piece kit includes the 5 most popular hole saw sizes, plus an arbor and an arbor spacer and adapter in an impact-resistant plastic carrying case. Hole saw sizes include 7/8-inch , 1-inch , 1-1/8-inch , 1-1/4-inch , and 1-1/2-inch. The spacer and adapter allow the 1/4-inch shank arbor to be used on hole saws up to 1-1/2 inches. These hole saws are designed with 4 teeth per inch for more efficient chip clearance and less heat build-up. This kit is backed by a limited 5-year warranty. What’s in the Box 7/8-inch hole saw, 1-inch hole saw, 1-1/8-inch hole saw, 1-1/4-inch hole saw, 1-1/2-inch hole saw, arbor, arbor spacer and adaptor, and plastic carrying case.

(more…)