Trend MT/JIG Mortise and Tenon Jig

From the Manufacturer

Trend’s Mortise and Tenon Jig enables mortise and tenons and dowel joints to be cut with a router. Ideal for cabinet, chair and table construction. The jigs is made of precision cut steel plates and body. The included set-up bar makes adjustments quick and easy. The five most common sizes of mortise and tenon joints (1/4-Inch to 5/8-Inch) are supported using the included screw-in style guide bushes. The base can be adjusted with the included T-wrench to accommodate angled joints. One set-up allows for both the tenon and mortise cuts. Clamps are also included to secure the wood while routing. Bits and a dust kit are sold separately.

Quick, accurate and versatile jig allows you to cut perfect-fitting mortise and tenons with a plunge router — requires only one setup to cut both pieces.Ideal for cabinet, chair and table construction. Simply clamp lumber vertically against the angle bar to rout the tenon. Mortise is routed in pro (more…)

Heavy-Duty Tenoning Jig

Straight, angled or mitered tenons – this jig cuts them all!
Safety, accuracy and repeatability are the hallmarks of this heavy-duty tenoning jig. Designed to fit any table saw with a 3/4′ X 3/8′ miter groove, this jig will hold your stock in a precise position. The adjustable back stop will support stock from 0 degrees to 45 degrees. The width of the cut is controlled with a fine-threaded adjustment knob. Constructed of cast iron and steel.

(more…)

Jet 708295 Tenoning Jig with Quick Release

Amazon.com Review

If you’ve ever cut a tenon on your router table, you will appreciate this simple yet perfect jig for the table saw. Jet’s design fits all left- and right-tilt saws with a 3/8- by ¾-inch slot for the miter gauge, found on most standard saws. It’s made of brute-strong cast iron, and the fit and finish are Jet quality. It’s made for a T-slot groove, but the T is removable to fit a plain grove as well. Assembly is quick and straightforward, and the beauty and precision of the jig will be apparent during your calibration and setup. If you’re in production work, this jig is a great choice, because it’s got a quick-release feature that gets your finished piece out and your new stock in place in just a couple seconds. The handwheel tightens your workpiece securely against the fence, and fast, gross adjustments are a snap: just loosen the locking levers, move the fence and tighten them up again. But fine adjustments are just as easy – loosen both levers (more…)

Delta 34-184 Universal-Deluxe Tenoning Jig

Amazon.com

When you need perfect, tight joints, the DELTA 34-184 Universal-Deluxe Tenoning Jig will give you professional results every time. The DELTA 34-184 is designed to work with any table saw with a 3/8-inch by 3/4-inch miter slot, standard on almost all table saws. It is made of durable, CNC precision milled cast iron, and can be used with both right and left tilt saws. The jig can be adjusted from 45 to 90 degrees with adjustable positive stops, and there’s a micro-fine adjustment knob for fine width-of-cut settings down to 4/1000-inch. By pushing a button, you can make for macro adjustments. Unlike most jigs that require tools to make adjustments, the DELTA 34-184 features a large thumbscrew that allows for tool-less adjustments. With two ergonomic handles, you’ll be able to make smooth cuts every time easily and comfortably. The jig handles up to 3-1/4-inch thick stock and features a quick-release hold down clamp for efficient work. The jig measures 11.8 x 12 (more…)

Grizzly H7583 Tenoning Jig

This fully adjustable Tenoning Jig fits left and right tilting table saws with 3/8″ x 3/4″ miter gauge slots while handling stock up to 31/4″ thick. It has an adjustable guide bar for removing any loose play for precise results and two large grip handles for smooth control. The bevel angle is adjustable from 90° to 75° and the backstop is adjustable from 90° to 45°. The multi-position control levers and extra large clamping handwheel also ensure accurate and repeatable results. Additional assembly required for left tilting saws.

(more…)

Kreg PRS3040 Precision Router Table Insert Plate Levelers

From the Manufacturer

These unique levelers are the easiest way to add an insert plate to your shop-built router table. They eliminate the need for a supporting rabbet and feature a unique bottom-mount design which includes 8 adjustable points of contact, four-corner lock-downs for stability and locating tabs for easy installation.

These unique levelers are the easiest way to add an insert plate to your shop-built router table. They eliminate the need for a supporting rabbet and feature a unique bottom-mount design which includes 8 adjustable points of contact, four-corner lock-downs for stability, and locating tabs for easy installation. Package includes 4 insert plate levelers. Designed for 3/4″ corner radius. Works with router tables up to 1-1/2″ thick

(more…)

Bosch RA1165 Under-Table Router Base with Above-Table Hex Key

New base for the 1617/1618 Series Routers * Allows adjustment of bit height from above the table – Features: Designed for router table usage * Wrench access from above table for convenient depth adjustment * Base has threaded holes for mounting to router table )positioned in Bosch 4-hole patter & common 3-hole pattern. ) Hardware included. * Wide 3-3/4 base opening allows use of larger bits * Motor housing does not rotate during depth adjustment, eliminating potential cause of horizontal movement of bit * Tool-free base change Quick clamp system allows motor to be moved w/ ease * Two additional protective devices prevent motor from falling to floor after quick-clamp is released. – Includes: Base, mounting hardware, chip shield & hex adjustment wrench w/ rubberized grip. – Specifications: Part Number: RA1165, Used on Model No. : 1617 / 1618 series routers & motors, Sales Pack Quantity: 1, Screw Head Size: 4-Hole Pattern: 4M, 3-Hole Pattern: 10-24, Category: Routers.

(more…)

Bosch RA1171 Cabinet Style Router Table

Amazon.com

The Bosch RA1171 Cabinet-Style Router Table provides a premium work surface for woodworking and routing. Designed to fit a variety of routers and able to mount on any workbench, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. And with its cabinet-style construction, it offers better dust collection and noise reduction for a more efficient work environment..caption {font-family: Verdana, Helvetica neue, Arial, serif;font-size: 10px;font-weight: bold;font-style: italic;}ul.indent {list-style: inside disc;text-indent: 20px;}table.callout {font-family: Verdana, Helvetica, Arial, serif;margin: 10px;width: 250;}td.callout3-c26 {height: 100 percent;background: url(‘http://g-ecx.images-amazon.com/images/G/01/th/content_26/Q1_2009/c26-callout3.png’) repeat-y;border-left: 0px solid #999999;border-right: 1px solid #999999;padding: 10px;width: 250px;}ul.callout {list-style: inside disc;text-indent: -5 (more…)

Milescraft 3402 PushStick and Depth Gage for Router Tables and Table Saws

From the Manufacturer

The Milescraft Model 3402 PushStick is more than a standard push stick. It has been engineered with a tall, tilted, natural grip handle that gives firm control while providing improved visibility and clearance from the cutting blade or bit. A built in Rear’ and soft surface base provides secure control of the stock without damage. Included in the package is a depth gauge for measuring, marking, or locating blades, bits, and fences. To keep the push stick, depth gauge, and other table top accessories close at hand, a docking station with a rare earth magnetic base has also been included.

The Milescraft Model 3402 PushStick is more than a standard push stick. It has been engineered with a tall, tilted, natural grip handle that gives firm control while providing improved visibility and clearance from the cutting blade or bit. A built in Rear and soft surface base provides secure control of the stock without damage. Included in t (more…)