Whiteside Ten Essential Router Bits Set

Own the 10 most useful router bits to have around. Fine Woodworking Magazine has specified these 10 profiles to be the “Ten Essential Router Bits” for every shop. Woodcraft is proud to offer these profiles in Whiteside Machine quality. Set includes: 1/4″ straight (1/4″D x 1″CL, 1/4SH); 1/2″ double flute straight (1/2″D x 1 1/2″ CL, 1/2″SH); 3/8″ standard upcut spiral (3/8″D, 1/2″SH); 10 degree dovetail (1/2″ x 10 degree, 1/2″ SH); chamfer (5/8″CL, 1/2″SH); 1/4″ round-over (1/4″R, 1/2″SH); 3/8″ cove (3/8″R, 1/2″SH); 1/2″ double flute flush trim (1/2″D x 1 1/2″CL, 1/2″SH); rabbet set (1/2″SH with a bearing to make rabbets 1/2″, 5/8″, and 3/4″); and a slotting cutter set (1/2″ 3 wing slot cutter w/arbor, 1/2″SH). D – Diameter, R – radius, SH – Shank, CL – Cutting Length

(more…)

MLCS 7733 60-Degree Woodworking Edge Banding Tongue and Groove Set, 1/2-Inch Shank, 2-Piece

From the Manufacturer

Add an attractive and durable edge to your cabinet doors and shelf edges. For use with plywood panels, MDF panels or shelves from 1/2-Inch to 1-Inch thick. All matched 2 piece bit sets are two-flute, carbide-tipped. Simply center the male cutter on the stock and make the cut. Next match up the female cutter with the center point of the first cut. Finish by gluing together the two pieces and flush trim the edges, if necessary. 60-Degree bits feature a tongue and groove for a larger glue surface area and easier alignment of edge banding. 1-7/16-Inch large diameter. 1-Inch carbide height. Recommended for use in a table mounted router.

Add an attractive and durable edge to your cabinet doors and shelf edges. For use with plywood panels, MDF panels or shelves from 1/2″ to 1″ thick. All matched 2 piece bit sets are two-flute, carbide-tipped. Simply center the male cutter on the stock and make the cut. Next match up the female cutte (more…)

MLCS 8376 Plywood Straight Router Bit 3-Piece Boxed Set

From the Manufacturer

Boxed Set includes 3 quality Carbide-tipped router bits in common metric plywood sizes: 13/64″ (5.2 mm–for 1/4″ undersize), 31/64″ (12.3 mm–for 1/2″ undersize), and 23/32″ (18.2 mm–for 3/4″ undersize). All Bits are 1/2″ shank.

Boxed Set includes 3 quality Carbide-tipped router bits in common metric plywood sizes: 13/64″ (5.2 mm–for 1/4″ undersize), 31/64″ (12.3 mm–for 1/2″ undersize), and 23/32″ (18.2 mm–for 3/4″ undersize). All Bits are 1/2″ shank.

(more…)

MLCS 8369 1/2-Inch shank Carbide-tipped Router Bit Set, 30-Piece

From the Manufacturer

MLCS high quality router bit set at an incredible price. Just 3.33 Dollar per bit. Wood storage box included. Includes bits: 3 cove (1/4-Inch, 3/8-Inch, 1/2-Inch), 2 flush trim (3/8-Inch, 1/2-Inch), 3 dovetail (14 deg-1/2-Inch, 5/8-Inch & 9 deg-3/8-Inch), 45-Degree chamfer, 2 roman ogee (5/32-Inch, 1/4-Inch), 6 round over (1/8-Inch, 3/16-Inch, 1/4-Inch, 5/16-Inch, 3/8-Inch, 1/2-Inch), 5 straight (1/4-Inch, 5/16-Inch, 3/8-Inch, 1/2-Inch, 3/4-Inch), 1 rabbeting (3/8-Inch), 3 round nose (1/4-Inch, 3/8-Inch, 1/2-Inch),1 bevel (25 deg), 1 slot cutter (1/4-Inch), 1 V-groove (1/2-Inch), 1 panel pilot (3/8-Inch), 1 Allen wrench and 1 bearing to convert round over bit into beading bit. 1/2-Inch shank

High quality router bit set at an incredible price. Just $3.33 per bit. Wood storage box included. Includes bits: 3 Cove (1/4″, 3/8″, 1/2″), 2 Flush Trim (3/8″, 1/2″), 3 Dovetail (14 deg-1/2″, 5/8″ & 9 deg-3/8″), 45 degree Chamfer, 2 Rom (more…)

MLCS 17840 Katana Tongue and Groove Router Bit Set, 1/2-Inch Shank, 2-Piece

From the Manufacturer

Top of line 2-Piece set. 3 flute, carbide tipped with totally enclosed ball bearing guides. The double 1/4-Inch cutter makes the tongue and the single 1/4-Inch slot cutter cuts the groove, 1/2-Inch shank. Premium Katana router bits equal or exceed any on the market. We support your woodworking efforts by providing the safest tools available made with the best materials, using no design shortcuts. Katana router bits are turned on multi-axis CNC grinders, using the highest quality steels. They’re designed for years of safe, precise, reliable performance

3 flute, micrograin carbide-tipped with totally enclosed ball bearing guides. The double 1/4? cutter makes the tongue, and the single 1/4? slot cutter cuts the groove. 1-7/8″ Large Diameter. 3/4″ Cut Height. 1/2″ Cut Depth. 1/2″ Shank.

(more…)

WHITESIDE PART #401 7 PC 1/2 SHANK BASIC ROUTER BIT SET C/O #1058 #1067 #1804 #1901 #2008 #2305 AND #2405

The Whiteside Basic Router Bit Set includes some of the most called upon bits for woodworking operations with your router. This set includes the 3/8″ radius roundover and beading bit, 45 degree chamfer bit, 1/2″ radius flush trim bit, 3/8″ cutting depth rabbet bit, 3/8″ radius cove bit, 1/2″ diameter straight bit, and the 1/4″ diameter straight bit. These bits are the staples of most every woodworker’s shop. The Whiteside Basic Router Bit Set even includes this durable molded case for safe storage and organization. All bits are 1/2″ shank.

Whiteside Router Bits are one of the few brands still made in the U.S.A. Their attention to quality of materials and expert brazing and grinding technologies has made them a furniture industry favorite since the early 70’s.

(more…)

MLCS 8375 Straight Router Bit 5-Piece Boxed Set

From the Manufacturer

Works perfectly for tricky cross-grain rail cuts, eliminating the need to make the router table fence and mitre slot parallel. Small and narrow cuts will be no problem. dual 500 lb. capacity hold down clamps and a special abrasive strip hold your material in place once you align it flush with the outer edge. Just glide the sled along your router fence using the sturdy plastic handle. Cut into the backer block (reducing sloppy tearout), completing your cut. Backer block is replaceable, allowing use of multiple profiles. This 9-1/2″ x 18-3/8″ x 1/4″ thick PVC sled can also hold smaller workpieces, keeping fingers away from dangerous blades. REMEMBER: Always keep router bits seated with at least 1 inch of metal gripped by the collet.

Boxed Set includes 5 quality Carbide-tipped router bits in sizes 1/4″, 3/8″, 1/2″, 5/8″, and 3/4″. All Bits are 1/2″ shank.

(more…)

Freud 89-650 Four Piece Undersized Plywood Router Bit Set 1/2

Amazon.com

The Freud Difference Freud manufactures some of the most innovative, technologically advanced saw blades in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo — a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry. About Freud Router Bits Serious woodworkers choose serious accessories. They choose Freud. An industry leader for over 50 years, the Freud name equa (more…)

MLCS 8389 Woodworking Pro Cabinetmaker Router Bit Set with Undercutter, 6-Piece

From the Manufacturer

This professional quality set contains six carbide-tipped bits needed for cabinet making, raised panel doors, table tops and drawer assembly. These 1/2-Inch shank bits were carefully chosen for their ability to create fine furniture or custom cabinetry for a kitchen. Designed for up to 3/4-Inch wood thickness. wood storage box included. set includes: ogee raised panel bit with Undercutter, 3-1/8-Inch large diameter; ogee rail and stile matched pair, 1-5/8-Inch large diameter; round over and ogee door lip bit, 1-1/4-Inch large diameter; glue joint bit, 1-3/4-Inch large diameter; and drawer lock bit, 1-3/4-Inch large diameter.

This professional quality set contains six carbide-tipped bits needed for cabinet making, raised panel doors, table tops and drawer assembly. These 1/2″ shank bits were carefully chosen for their ability to create fine furniture or custom cabinetry for a kitchen. Designed for up to 3/4″ wood thickness. Wo (more…)