For anyone building rustic furniture, the Veritas aluminum-body tenon cutters will cut smooth, perfect tenons with radiused shoulders. Cutters are designed to run vibration free while being driven by an electric drill, yet still yield the same accuracy when used with a hand brace. The anodized body has been balanced to eliminate vibration and an integral level vial makes in-line cutting more accurate. To increase safety, the back end of the blade is contoured to avoid anything extending beyond the revolving aluminum body. The body has a built-in honing guide for easy sharpening of blades on a drill-press mounted drum sander. The blade is adjustable to cut the exact size of tenon required in both dry and green wood. Available in eight cutting diameters. Sizes 5/8″ to 1″ cut 2-3/4″ long tenons and are typically used for most rustic furniture. Sizes 1-1/4″ to 2″ will cut 4-1/4″ long tenons and are used for larger structural connections, such as bed frame to post, or fence (more…)
Cutter
Amazon.com
The Stanley 1-/38-Inch Replacement Block Plane Iron Cutter for Plane #12-960 can be honed to a razor-sharp edge. The cutter is ground to provide a flat surface that is easier to sharpen. This replacement plane iron is made from hardened and tempered high carbon chrome steel which have excellent edge retention characteristics and allow a razor sharp edge to be honed. Designed for use with planes prior to the “G Series,” the cutting width is 1-3/8 inches. The iron is supplied with an accurate ground edge of 25 degrees; however, finishing with an additional honed angle of 30 degrees is recommended. This cutter comes with Stanley’s limited lifetime warranty.
* 1-3/8″ blade for low angle plane * Replaces blade for model 12-960 (2510-1049) Low Angle plane
See all
(more…)
* Replacement plane iron for plane number 12-331 for fine woodworking block plane iron * Made from high chrome carbon steel which has excellent edge retention characteristics and allows a razor sharp edge to be honed * Has a flat surface which is easier to sharpen * Supplied with an accurately ground edge of 25 deg. * 7″ x 2″ * 1-5/8″ cutter width
No description for this product could be found, but have a look over at Amazon for reviews and other information.
From the Manufacturer
Freud’s bushings are manufactured to the highest precision to insure a cut equal to that of the cutter without the bushing.
Panel Raising Carbide Tipped Shaper Cutter (Cat.# 43-949)
Superior Craftmanship – Made in Japan
From the Manufacturer
Freud’s bushings are manufactured to the highest precision to insure a cut equal to that of the cutter without the bushing.
No description for this product could be found, but have a look over at Amazon for reviews and other information.
Avoid the possibility of joint failure in your chairs, stools, or log furniture with this clever expanding cutter and wedge-ring system. The high-speed steel Tenon-Lok cutter features spring-action blades that flare out at the base, creating a dovetail-shaped round mortise. The sharpened tapered steel wedge-ring then sits in the flared mortise, expanding the tenon with minimal splitting as it gets driven into place. The resulting joint will never come apart, and is completely immune to weather related expansion and contraction. Ideal for repairs or original construction, the Tenon-Lok system requires both a cutter and a matching wedge ring (Rockler# 39604, sold separately in convenient multi-packs). Every Tenon-Lok cutter includes a steel Setter Guide to create an impression on the base of the mortise for the wedge ring to rest in. Using the Tenon-Lok system: 1. Drill a standard round mortise with a forstner bit or another bit of your choice. 2. Chuck the same diamete (more…)