INCRA Build-It System Starter Kit

From the Manufacturer

Your new INCRA Build-It System Starter Kit provides all of the Build-It System components you’ll need to produce any of the 5 different beneficial jigs shown here, plus many more! This highly versatile collection of Jig and Fixture “building blocks”, along with the included plans, will change the way you approach these and many other jig designs, making it possible to produce in minutes what used to take hours or even days.

Quickly and easily create a wide variety of common and special purpose jigs and fixtures that you typically find hanging on the walls and rafters in just about any woodshop. The INCRA Build-It Modular Jig and Fixture Platform System is a highly versatile new method for creating those jigs and fixtures. The Build-It System begins with INCRAs Miter Slider adjustable aluminum runners. These tried and true jig and fixture runners have become a workshop staple for the production of sliding and fixed base (more…)

WP Robot WordPress Autoposter

INCRA Wheel Kit for Router Table Stand

From the Manufacturer

Use this INCRA Wheel Kit to make your router table mobile in a small shop. Compatible with INCRA Router Table Stand 36-inches and Router Table Stand 43-inches, the kit features powder coated 14 gauge steel parts. Stepping on the double-action lever at the swivel caster lifts and holds one end of the router table stand, and stepping on the other half of the lever returns the leg levelers to the floor.

Wheel kit for
shop mobility:
Need to move your router table aside from time to time? Incra’s optional wheel kit makes it easy. Just step down to lower the wheel and make your move. Step down again to raise the wheel placing the legs back on solid ground.

(more…)

Incra BNDRUL12 12-Inch Incra Precision Bend Rule

From the Manufacturer

The New INCRA Bend Rule is precisely what you need for layout and measurement along the edge of a board or other workpiece. We’ve put micro-fine marking holes every 1/16″, 1/32″ and 1/64″ to instantly locate your sharp pencil point or scribe EXACTLY on target with zero uncertainty, zero parallax and zero eye strain. The 90 deg. shape holds it snugly in place while the two scale surfaces let you mark and measure on the top, edge and corners simultaneously. There are even two vertical end scales with marking holes for drawing precision parallel lines relative to the edge of your work. Available in 6″, 12″ and 18″ lengths. Engraved stainless steel.

(more…)

INCRA CENTER12 Centering Rule  12-Inch

From the Manufacturer

Find the exact center of any workpiece up to 12″ wide. In addition to top and bottom micro-fine marking holes at every 1/32″ it also has a built-in protractor with guide slots at every 45°, 30°, 22.5°, and 5° interval.

Find the exact center of any workpiece up to 12″ wide. Has a built-in protractor, too. Laser cut slots are incredibly precise, and allow you to make your mark with a mechanical pencil in the slot.

(more…)

Incra RULE06 6-Inch Incra Rules Marking Rule

From the Manufacturer

INCRA Precision Marking Rules. At first glance you might think you are looking at an ordinary ruler. But look closer and you will see micro-fine marking holes and slots every 1/16″, 1/32″ and 1/64″ to instantly locate a sharp pencil point or scribe EXACTLY where you want it. No more squinting as you try to line up your pencil on that blur of lines along the edge of your old steel rule. Even when the lighting is less than perfect, you can effortlessly place your mark precisely on target with zero uncertainty, zero parallax and zero eye strain. Who would have thought there was so much room for improvement in the common ruler. There WAS and INCRA RULES is it! Available in 6″, 12″ and 18″ lengths. Engraved stainless steel.

The first stainless steel rule with micro-fine guide holes for marking a fine dot with a sharp pencil or metal scribe.

(more…)

Incra RULE12 12-Inch Incra Rules Marking Rule

From the Manufacturer

INCRA Precision Marking Rules. At first glance you might think you are looking at an ordinary ruler. But look closer and you will see micro-fine marking holes and slots every 1/16″, 1/32″ and 1/64″ to instantly locate a sharp pencil point or scribe EXACTLY where you want it. No more squinting as you try to line up your pencil on that blur of lines along the edge of your old steel rule. Even when the lighting is less than perfect, you can effortlessly place your mark precisely on target with zero uncertainty, zero parallax and zero eye strain. Who would have thought there was so much room for improvement in the common ruler. There WAS and INCRA RULES is it! Available in 6″, 12″ and 18″ lengths. Engraved stainless steel.

The first stainless steel rule with micro-fine guide holes for marking a fine dot with a sharp pencil or metal scribe

(more…)

Heavy Metal Bands

Incra PROTRAC06 6-Inch Precision Marking Protractor

Amazon.com

The Incra 6-Inch Precision Marking Protractor lets you plot any angle with ease and absolute accuracy. A metal T-Bar and see-through cross hairs provide perfect alignment against the edge of your work-piece. Remove the T-Bar to work on flat surfaces or to use the 6-inch centering scale with micro-fine marking holes at every 1/32 inches. This marking protractor has micro-fine guide holes at every 45-, 30-, 22.5-, 5-, 1-, and 0.5-degree intervals. Four angle scales, including one for marking narrow stock, suit every need. It’s easy on the eyes, incredibly accurate, and just plain fun to use.

The Incra 6-Inch Precision Marking Protractor lets you plot any angle with ease and absolute accuracy. A metal T-Bar and see-through cross hairs provide perfect alignment against the edge of your work-piece. Remove the T-Bar to work on flat surfaces or to use the 6-inch centering scale with micro-fine marking holes at every 1/32 inches. This marking (more…)

INCRA Build-It T-Slot Panel Connector 18-inch

From the Manufacturer

INCRA’s new Build-It T-Slot Panel Connectors tie it all together. Interconnect the 5/8-inch pre-cut and pre-drilled MDF Build-It Panels in seconds. Adds strength, rigidity and a rock solid T-slot. Makes adding and positioning your jig accessories and hold down clamps a snap! Now you can build hundreds of your own custom jigs and fixtures in minutes with just a screwdriver and your imagination.

The glue that holds everything together is INCRAs innovative NEW T-Slot Panel Connector. This specially designed aluminum components serve to simultaneously interconnect the panels and provide a rock solid T-Slot for adding and holding jig accessories, fences, stops, Build-It Hold Down Clamps, and Build-It L-Brackets. With this new system, set up and connection is easily accomplished with a screwdriver and the included fasteners.

(more…)

INCRA Build-It T-Slot Panel Connector 24-Inch

From the Manufacturer

INCRA’s new Build-It T-Slot Panel Connectors tie it all together. Interconnect the 5/8-inch pre-cut and pre-drilled MDF Build-It Panels in seconds. Adds strength, rigidity and a rock solid T-slot. Makes adding and positioning your jig accessories and hold down clamps a snap! Now you can build hundreds of your own custom jigs and fixtures in minutes with just a screwdriver and your imagination.

The glue that holds everything together is INCRAs innovative NEW T-Slot Panel Connector. The specially designed aluminum components serve to simultaneously interconnect the panels and provide a rock solid T-Slot for adding and holding jig accessories, fences, stops, Build-It Hold Down Clamps and Build-It L-Brackets. With this new system, set up and connection is easily accomplished with a screwdriver and the included fasteners.

(more…)