Ulmia Marking Gauge – Curved Fence

With 2 ultra-precision scribing rods with inlaid metric scale and scribing tips made of steel. Scribing rod arrest mechanism with brass wing screw. Fence is faced with Ironwood (Lignum Vitae) for durability. Detachable fence for scribing curved surfaces stores on back side of head. Marking gauges are precision tools for the parallel scribing of width and thickness measurements. Made of the best quality white beech, they comply with all requirements imposed on a modern scribing instrument for woodworking operations.

(more…)

Incra RULE06 6-Inch Incra Rules Marking Rule

From the Manufacturer

INCRA Precision Marking Rules. At first glance you might think you are looking at an ordinary ruler. But look closer and you will see micro-fine marking holes and slots every 1/16″, 1/32″ and 1/64″ to instantly locate a sharp pencil point or scribe EXACTLY where you want it. No more squinting as you try to line up your pencil on that blur of lines along the edge of your old steel rule. Even when the lighting is less than perfect, you can effortlessly place your mark precisely on target with zero uncertainty, zero parallax and zero eye strain. Who would have thought there was so much room for improvement in the common ruler. There WAS and INCRA RULES is it! Available in 6″, 12″ and 18″ lengths. Engraved stainless steel.

The first stainless steel rule with micro-fine guide holes for marking a fine dot with a sharp pencil or metal scribe.

(more…)

Incra RULE12 12-Inch Incra Rules Marking Rule

From the Manufacturer

INCRA Precision Marking Rules. At first glance you might think you are looking at an ordinary ruler. But look closer and you will see micro-fine marking holes and slots every 1/16″, 1/32″ and 1/64″ to instantly locate a sharp pencil point or scribe EXACTLY where you want it. No more squinting as you try to line up your pencil on that blur of lines along the edge of your old steel rule. Even when the lighting is less than perfect, you can effortlessly place your mark precisely on target with zero uncertainty, zero parallax and zero eye strain. Who would have thought there was so much room for improvement in the common ruler. There WAS and INCRA RULES is it! Available in 6″, 12″ and 18″ lengths. Engraved stainless steel.

The first stainless steel rule with micro-fine guide holes for marking a fine dot with a sharp pencil or metal scribe

(more…)

Heavy Metal Bands

Incra PROTRAC06 6-Inch Precision Marking Protractor

Amazon.com

The Incra 6-Inch Precision Marking Protractor lets you plot any angle with ease and absolute accuracy. A metal T-Bar and see-through cross hairs provide perfect alignment against the edge of your work-piece. Remove the T-Bar to work on flat surfaces or to use the 6-inch centering scale with micro-fine marking holes at every 1/32 inches. This marking protractor has micro-fine guide holes at every 45-, 30-, 22.5-, 5-, 1-, and 0.5-degree intervals. Four angle scales, including one for marking narrow stock, suit every need. It’s easy on the eyes, incredibly accurate, and just plain fun to use.

The Incra 6-Inch Precision Marking Protractor lets you plot any angle with ease and absolute accuracy. A metal T-Bar and see-through cross hairs provide perfect alignment against the edge of your work-piece. Remove the T-Bar to work on flat surfaces or to use the 6-inch centering scale with micro-fine marking holes at every 1/32 inches. This marking (more…)