MLCS 9765 Drill Press Table

From the Manufacturer

Our 12″ x 24″ Drill Press Table is made of 7/8″ thick MDF/Melamine. Includes two T-Tracks for hold-downs, an adjustable fence that guarantees maximum holding power and a removable insert that can be drilled for any size sanding drum. Works with drill press tables that have parallel slots to the center hole that can accept two 9-1/2″ on center bolts or that are 9-1/4″ or smaller. *Drill Press Not Included.*

Our 12″ x 24″ Drill Press Table is made of 7/8″ thick MDF/Melamine. Includes two T-Tracks for hold-downs, an adjustable fence that guarantees maximum holding power and a removable insert that can be drilled for any size sanding drum. Mounting & Compatibility Note: This table mounts to all drill presses, most without any modifications. The table will adapt to Drill Presses that have parallel slots 9-5/8″ on center bolts or it can clamp from the outside on tables that are less than 9-3/8″ wide. If your table does not fit the (more…)

MLCS 9146 Forstner 16-Piece Bit Set in Wooden Box

From the Manufacturer

Forstner bits are designed to drill flat bottom or through holes cleanly in end grain, thin stock, veneers and regular stock. They enlarge existing holes with ease and can bore any arc of a circle. These bits will not move off center through unusual grain or knots. Great for mounting mini-quartz clock movements, cup hinges, and door locks. Sizes 1/4-to-7/8-inch bits are supplied with solid rims. The saw teeth design for larger diameter bits (1-inch and larger) stop burning and cut faster without losing the advantages of Forstner bit action. Includes these high quality steel bits: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8, 2, 2-1/8. Shank size is 3/8 and overall length is 3-1/2 for sizes 1/4 through 2-1/8-inch.

Forstner bits are designed to drill flat bottom or through holes cleanly in end grain, thin stock, veneers and regular stock. They enlarge existing holes with ease and can bore a (more…)

MLCS 6406 Pins and Tails Half Blind Dovetail Jig Set

From the Manufacturer

This solid aluminum template and steel jig is machined precisely for creating strong and secure half blind dovetail joints or half-blind rabbeted dovetail joints. This is the perfect solution for sturdy boxes and drawers with the classic dovetail joint design. The solid aluminum template is CNC machined. The steel beams secure both work pieces snugly. Works for 1/2-Inch to 1-Inch drawer sides and 5/8-Inch to 1-Inch drawer fronts (up to 12-Inch in width). Since you cut both sides of the half-blind dovetail joint at the same time, a perfect fit is assured for this joint. Self-spacing edge guides allow proper offset for precise joint alignment. Detailed instruction manual guides you from initial setup through final assembly. 5/8-Inch router guide bushing (not included) is required. 14-Degree dovetail bit (1/4-Inch shank) included.

This solid aluminum template and steel jig is machined precisely for creating strong and secure hal (more…)

MLCS 6410 24-Inch Pins and Tails Half Blind Dovetail Jig, 1/4-Inch Shank Router Bit

From the Manufacturer

The MLCS steel template and jig are precisely machined to cut strong and secure half-blind and Rabbeted half-blind dovetail joints. The 24-inch capacity is a perfect solution for strong boxes, drawers and small chests. The jig features steel beams to secure the work pieces in place. Works for 1/2-inch to 1-inch thick drawer/box sides and 5/8-inch to 1-inch drawer/box fronts/backs (up to 24-inch wide). A perfect fitting half-blind dovetail joint is achieved, as both sides of the joint are cut simultaneously. Self spacing edge guides allow the proper offset for precise joint alignment. Detailed instruction manual is included. 5/8-inch router guide bushing (not included) is required. Set includes Steel Template (creates 1/2-inch wide tails that are 27/32-inch on center), Steel Jig and a carbide-tipped 14 degree Dovetail Router Bit (1/4-inch Shank).

The steel template and jig are precisely machined to cut strong and secure half-b (more…)

MLCS 8710 24-Inch Pins and Tails Half Blind Dovetail Jig, 1/2-Inch Shank Router Bit

From the Manufacturer

The MLCS steel template and jig are precisely machined to cut strong and secure half-blind and Rabbeted half-blind dovetail joints. The 24-inch capacity is a perfect solution for strong boxes, drawers and small chests. The jig features steel beams to secure the work pieces in place. Works for 1/2-inch to 1-inch thick drawer/box sides and 5/8-inch to 1-inch drawer/box fronts/backs (up to 24-inch wide). A perfect fitting half-blind dovetail joint is achieved, as both sides of the joint are cut simultaneously. Self spacing edge guides allow the proper offset for precise joint alignment. Detailed instruction manual is included. 5/8-inch router guide bushing (not included) is required. Set includes Steel Template (creates 1/2-inch wide tails that are 27/32-inch on center), Steel Jig and a carbide-tipped 14 degree Dovetail Router Bit (1/2-inch Shank).

The steel template and jig are precisely machined to cut strong and secure half-b (more…)

MLCS 9012 Woodworking Exclusive Merle Multi-Corner Clamp

From the Manufacturer

Flexible jaw inserts are non-marring and are easily removed. They’re made of high impact ABS plastic for long life and heavy use. The dual pivot feature allows the Merle to clamp virtually any size or shape securely! Perfect for circles and ovals, plus triangles, hexagons, octagons, and more. 23-foot steel banding included. The Merle clamp has almost no capacity limitation! Clamps as small as 2-5/8-by-2-5/8-to-69-by-69-inch, or 23-feet around, but can be extended to any length by using standard 3/8-inch steel banding or strapping. The Merle clamp will hold any type of frame for easy gluing, nailing or screwing. Even jointing force at all corners. It’s excellent for wide cabinet type frames (use in the center or edges), and also for narrow picture frames. The adjustable Merle clamp allows you to use as much or as little clamping pressure as needed. Cast aluminum and steel construction makes the Merle clamp a tough tool that will work hard and long f (more…)

MLCS Stackable Slot Cutter Router Bit Set with 1/2

Versatile, carbide tipped three-wing Stackable Slot Cutter Set cuts a wide variety of grooves. Simply adjust the arrangement of the cutters and shims on the 1/2″ arbor to create a wide variety of groove sizes for dadoes, tongue and groove joints, rabbets, or biscuit joints. With the included 6 carbide-tipped slot cutters (1/16″, 3/32″, 1/8″, 5/32″, 3/16″, & 1/4″), shims, and bearing (7/8″ OD x 5/16″ ID) for 1/2″ cut depth, almost any groove from 1/16″ to 11/16″ can be created. Individual cutters can also create precisely-sized grooves and you can purchase additional bearings to adjust the depth of cut. Storage box included.

(more…)