Pinnacle 12″ half body protractor head features precision ground cast iron, finished in baked enamel.
Protractor
These digital protractors allow you to precisely set angles in 0.05 degree increments. All protractors have strong magnets on all four edge surfaces and a front locking lever to hold the arm position while transferring measurements. Each protractor now features a hold function, ensuring you never loose your reading and a reverse reading capability for those hard to calculate angles. The smaller protractor, measuring 4″ from pivot to end, works great to set miter gauges, bandsaws, drill presses, etc. while the larger models, measuring 8″ and 12″ from pivot to end, work well on miter saws, door frames and wall angles for cutting crown molding and trim.
This beautiful instrument measures angles from 0° to 360° with easily visible accuracy as precise as 5 minutes, or 1/12 of a degree. It comes with 11″ and 7″ adjustable blades, as well as a 3″ long 90° reference attachment (inset photo). Construction is all stainless steel. Blades can be locked anywhere along their length, and the bezel can be locked at any angle. For drafting, determining existing angles, or setting up machines and jigs, it’s the most versatile and most precise protractor we’ve ever offered.
This 18″ Digital Protractor enables you to precisely set angles in 0.5 degree increments. It has strong magnets on all four edge surfaces and a front locking lever to hold the arm in position while transferring measurements. FEATURES A “HOLD” FUNCTION THAT ENSURES YOU WILL NEVER LOSE YOUR READING, NOR DO YOU NEED TO BE CONCERNED ABOUT OVER-TIGHTENING THE TOOL! Also features a reverse reading capability for those hard to calculate angles. Set miter saws, band saws, drill presses; measure frames, wall angles for cutting crown molding and trim. Packaged with extra battery.
Cut huge amounts of time off of your crown molding job! Instead of fussing with countless trial cuts, this tool tells you the exact angle to cut the first time, and the only time.
From the Manufacturer
Steel protractors are for setting bevels and measuring and marking angles. It has permanently etched graduations for 0 to 180 degrees in opposite directions. It has a 3-3/8″ x 2″ head. The 6″ adjustable protractor arm locks into desired position with knurled thumb nut. Square head.
Made of ground stainless steel. Permanently etched graduations from 0 to 180 in opposite directions. 3 3 8″ x 2″ head. 6″ adjustable protractor arm locks onto desired position with knurled thumb nut.
This 8″ Digital Protractor enables you to precisely set angles in 0.05 degree increments. It has strong magnets on all four edge surfaces and a front locking lever to hold the arm position while transferring measurements. FEATURES A “HOLD” FUNCTION THAT ENSURES YOU WILL NEVER LOSE YOUR READING, NOR DO YOU NEED TO BE CONCERNED ABOUT OVER-TIGHTENING THE TOOL! Also features a reverse reading capability for those hard to calculate angles. Set miter saws, band saws, drill presses; measure door frames, wall angles for cutting crown molding and trim. Packaged with extra battery.
This 4″ Digital Protractor enables you to precisely set angles in 0.05 degree increments. It has strong magnets on all four edge surfaces and a front locking lever to hold the arm in position while transferring measurements. FEATURES A “HOLD” FUNCTION THAT ENSURES YOU WILL NEVER LOSE YOUR READING, NOR DO YOU NEED TO BE CONCERNED ABOUT OVER-TIGHTENING THE TOOL! Also features a reverse reading capability for those hard to calculate angles. Set miter saws, band saws, drill presses; measure frames, wall angles for cutting crown molding and trim. Packaged with extra battery.
From the Manufacturer
This protractor offers +/- 0.1 degree accuracy and repeatability along with the convenience and ease of use of a digital display. It can be used in any plane which makes it ideal for setting both bevel and miter angles on a variety of woodworking tools. The WR400 has a resolution of 0.1 degrees along with an accuracy and repeatability of +/- 0.1 degrees. It has a range of +/-180 degrees which gives it the ability to cover most of the angle measuring needs of any woodworker. The WR400 includes embedded magnets in all edges of the blades to allow them to attach to cast iron tables and steel saw blades for easy angle setting. It has the added feature of a friction lock which enables them to hold the blades in a fixed position for transferring angle measurements. The extremely compact WR400 has 3-inch long blades which makes it ideal for setting miter saw bevel angles as well as table angles for drill presses and band saws. The simple functions inclu (more…)