From the Manufacturer
Coping Saw Replacement Blades (Coarse-17pt)-Carded-3PK
Replacement blades for the ‘ProTouch’ Coping Saw [101.7979].
Replacement
From the Manufacturer
Coping Saw Replacement Blades (Fine-21pt)-Carded-3PK
Replacement blades for the ‘ProTouch’ Coping Saw [101.7979].
From the Manufacturer
Hardened, tempered high-carbon chrome steel assures excellent edge retention. Can be honed to a razor-sharp edge. Ground to a flat surface for easy sharpening. Comes with accurate ground edge of 25º; finishing with an additional honed angle of 30° is recommended.
Item #: 680-12-313. Cutting Width = 2 inType = Plane BladeCustomers also search for: Tools and Storage\Hand Tools\Chisels, Punches and Pins\Planers Discount Cutter for 12-513, Buy Cutter for 12-513, Wholesale Cutter for 12-513, 076174123135, 12-313, Planer Accessories
Amazon.com
The Stanley 1-/38-Inch Replacement Block Plane Iron Cutter for Plane #12-960 can be honed to a razor-sharp edge. The cutter is ground to provide a flat surface that is easier to sharpen. This replacement plane iron is made from hardened and tempered high carbon chrome steel which have excellent edge retention characteristics and allow a razor sharp edge to be honed. Designed for use with planes prior to the “G Series,” the cutting width is 1-3/8 inches. The iron is supplied with an accurate ground edge of 25 degrees; however, finishing with an additional honed angle of 30 degrees is recommended. This cutter comes with Stanley’s limited lifetime warranty.
* 1-3/8″ blade for low angle plane * Replaces blade for model 12-960 (2510-1049) Low Angle plane
See all
(more…)
* Replacement plane iron for plane number 12-331 for fine woodworking block plane iron * Made from high chrome carbon steel which has excellent edge retention characteristics and allows a razor sharp edge to be honed * Has a flat surface which is easier to sharpen * Supplied with an accurately ground edge of 25 deg. * 7″ x 2″ * 1-5/8″ cutter width
Amazon.com
The Kreg KJD Replacement Drill Bit is designed for pocket hole joinery. It has a small tip with a clearance hole for the screw shank and a large diameter that makes a flat-bottom hole for screw heads. This bit is recommended for use with corded high-rpm drills.
Replacement 3/8″ stepped drill bit for all Kreg manual pocket-hole systems.
See all
(more…)